C11
11kW Stackable Energy Storage System
Stackable system option for inverter-and-battery procurement.
View configurations ↗Application / Procurement guide
Telecom Backup Planning
Evaluate storage configurations for a defined telecommunications backup requirement. The application description is a starting point for engineering review, not a guarantee of telecom system compatibility.
From the setting to the specification
Use this guide to match the equipment, operating time and charging plan with the product configurations below.
Compare candidate products ↗Start with the equipment
Describe the job
before choosing the battery.
A specified telecom load with confirmed interface voltage, current, operating mode and backup duration. Nominal battery voltage alone does not establish a usable telecom output.
Build the load list
- Device model and electrical input
- Which devices run at the same time
- Starting demand or intermittent work cycle
- Hours of operation and reserve requirement
- Available charging source and charging window
Candidate series
Compare the products behind this application.
The application match narrows the shortlist. The exact equipment and operating plan determine final suitability.
3 source-matched series · compare exact battery variants below.
C55
5.5kW Stackable Energy Storage System
Stackable system option for inverter-and-battery procurement.
View configurations ↗
C83
8.3kW Stackable Energy Storage System
Stackable system option for inverter-and-battery procurement.
View configurations ↗All matching configurations
Application wording in the quotation identifies these candidates. Confirm the appliance input and operating cycle before choosing a model.
| Series / model | Output | Battery V | Capacity Ah | Nominal Wh | Net weight | Next step |
|---|---|---|---|---|---|---|
| C11 / YX-D11200 | 11000W AC | 51.2V | 200Ah | 10240Wh | Confirm with quote | Quote configuration ↗ |
| C11 / YX-D11300 | 11000W AC | 51.2V | 300Ah | 15360Wh | Confirm with quote | Quote configuration ↗ |
| C11 / YX-D11400 | 11000W AC | 51.2V | 400Ah | 20480Wh | Confirm with quote | Quote configuration ↗ |
| C11 / YX-D11500 | 11000W AC | 51.2V | 500Ah | 25600Wh | Confirm with quote | Quote configuration ↗ |
| C11 / YX-D11600 | 11000W AC | 51.2V | 600Ah | 30720Wh | Confirm with quote | Quote configuration ↗ |
| C55 / YX-D55100 | 5500W AC | 51.2V | 100Ah | 5120Wh | Confirm with quote | Quote configuration ↗ |
| C55 / YX-D55200 | 5500W AC | 51.2V | 200Ah | 10240Wh | Confirm with quote | Quote configuration ↗ |
| C55 / YX-D55300 | 5500W AC | 51.2V | 300Ah | 15360Wh | Confirm with quote | Quote configuration ↗ |
| C55 / YX-D55400 | 5500W AC | 51.2V | 400Ah | 20480Wh | Confirm with quote | Quote configuration ↗ |
| C83 / YX-D55100 | 8300W AC | 51.2V | 100Ah | 5120Wh | Confirm with quote | Quote configuration ↗ |
| C83 / YX-D55200 | 8300W AC | 51.2V | 200Ah | 10240Wh | Confirm with quote | Quote configuration ↗ |
| C83 / YX-D55300 | 8300W AC | 51.2V | 300Ah | 15360Wh | Confirm with quote | Quote configuration ↗ |
| C83 / YX-D55400 | 8300W AC | 51.2V | 400Ah | 20480Wh | Confirm with quote | Quote configuration ↗ |
Plan the real operating session
What changes the product choice?
Energy and operating time
Collect the load profile, required autonomy, input supply and communication requirements. Confirm voltage windows, protection and integration with the existing power infrastructure.
Environment and connection
Assess site temperature, access, installation and maintenance. If transfer continuity is required, the switching behavior must be specified and tested independently.
Handling and charging
Include how the unit gets to the location, where it is placed, which cables are needed and when it will recharge. Battery energy is one part of the working plan; transport structure, interfaces and charging source affect whether the product is practical.
The supplied package
Request an engineering response tied to the site specification. Agree acceptance tests, interface documents, installed scope and support responsibilities before treating a storage product as a telecom solution.
Equipment worksheet
Turn an application into a sample test.
| Information | What the buyer records | How it is used |
|---|---|---|
| Equipment | Device names, models, voltage/current or watts | Select the relevant output interfaces and rating |
| Simultaneous use | Devices running together and any startup demand | Compare continuous and starting requirements |
| Operating schedule | Hours per device, duty cycle and reserve | Compare nominal energy and test duration |
| Location & handling | Surface, lifting, placement and connection route | Select the transport structure and accessory set |
| Charging | Mains or panel setup and time between sessions | Compare charger and solar-input arrangement |
| Acceptance | Pass criteria, package contents and documents | Make sample approval specific and repeatable |
For channels & OEM projects
Specify the product
your customer will receive.
Request an engineering response tied to the site specification. Agree acceptance tests, interface documents, installed scope and support responsibilities before treating a storage product as a telecom solution.
A useful supply brief includes the selected series and capacity, market interface, quantity split, accessories, instructions and packaging. Ask for a representative sample that matches this brief.
Send us your application brief
Share your load worksheet, expected use, target market and preferred product family. Add any required labels, manuals, package contents or documents to the quotation request.
Discuss this application ↗Before shortlisting a product
Which model is recommended for this application?
Choose against the actual device list, simultaneous demand, operating hours, handling and charging plan. The candidate list provides starting points, while a configuration-specific sample answers the final compatibility question.
Can I sell an application-specific kit?
Discuss the station, compatible accessories, instructions and package as a complete itemized set. Confirm which components are supplied and which are customer-provided.
How do I compare capacities?
Compare nominal Wh together with weight, charge time and the working schedule. Ah must be read with the battery voltage.
What should the sample demonstrate?
The intended load and operating schedule, interface compatibility, charging arrangement, handling, accessory set and agreed acceptance criteria.
Bring the equipment list. We’ll discuss the shortlist.
Tell us the equipment, target market, capacity and quantity. We’ll discuss a configuration and private label supply proposal.